|
|
1.Remove or disconnect the
following parts:
- Hood
- Radiator grille
- Headlamp
- Front bumper assembly
- Oil cooler hose <Vehicles with oil
cooler>
- Radiator assembly
- Air cleaner duct
- Steering shaft joint
- Heater hose
- Power steering reservoir tank
- Brake booster vacuum hose
- Accelerator cable
- Fuel hose
- Brake pipe
- A/C piping
- Clutch release cylinder <Vehicles with manual
transmission>
- Speedometer cable
- Parking brake cable
- Shift lever knob <Vehicles with manual
transmission>
- Select lever knob <Vehicles with automatic
transmission>
- Idle up vacuum hose
- Engine harness
- A/C harness
- Frame harness
- Earth strap
- Engine earth
- Door opening weatherstrip inner
- Floor carpet
- Cab body mounting bolt
|
|
|
2.
| caution |
Before lifting the vehicle,
check to be sure that all connections between
cab body, frame and engine are separated.
Connect sling wires to suitable bar or frame,
fitting protection covers as necessary.
|
After removing the cab body mounting bolts and the
cab body washers, insert wooden blocks to the cab body.
Gently lift the vehicle with a crane.
|
|
|
1.Remove or disconnect the
following parts:
- Fuel filler neck
- Rear body harness
- Rear body mounting bolts and screws
|
|
|
2.
| caution |
Make sure that the rear body
does not hit the cab body while it is being
raised.
|
Hook wires onto the rope hocks on the rear body, and
use a crane to raise the rear body.
|
