REMOVAL AND INSTALLATION

		Removal steps
		1.	Step stay
		2.	Side step garnish
		3.	Side step cover
		4.	Side step plate

		Removal steps
		1.	Side step pipe
		2.	Side step cover A
<<A>>	>>A<<	3.	Rivets A
		4.	Side step cap
<<A>>	>>A<<	5.	Rivets B
		6.	Side step plate
		7.	Side step cover B

DISASSEMBLY SERVICE POINT

<<A>> RIVETS A/RIVETS B REMOVAL

Use a drill (Φ 4.0 mm) to make a hole in the rivet A and rivet B to break it, and remove the rivet.

REASSEMBLY SERVICE POINT

>>A<< RIVETS A/RIVETS B INSTALLATION

Use a rivet tool shown in the illustration to connect the parts with rivets by the following procedures.
1.Insert rivet A into the side step pipe and side step cap and rivet B into the side step pipe and side step plate.
2.Place the rivet tool over portion C of rivet.
3.While pushing the flange surface of the rivet onto parts to be fixed with the rivet tool, press the handle of the tool.
4.Thin part of portion C of the rivet will cut off and the rivet is fixed in position.