REMOVAL AND INSTALLATION

	1.	Front three-diamond mark (Refer to <Single cab>, <Club and Double cab>.)
>>A<<	2.	Rear three-diamond mark (Refer to .)
>>A<<	3.	TRITON mark
>>A<<	4.	STRADA and TRITON mark
>>A<<	5.	STRADA mark
>>A<<	6.	DI-D and COMMON RAIL mark <Optional>
>>A<<	7.	L200 and Sportero mark <Optional>
>>A<<	8.	MIVEC and CLEAN DIESEL mark <Optional>
>>A<<	9.	MITSUBISHI decal <Optional>

INSTALLATION SERVICE POINT

>>A<< MARK INSTALLATION

1.Clean the mark installation surfaces on the body with the parts cleaner (MZ100387 or equivalent).

caution

When attaching the marks, the ambient temperature should be 20 - 38°C and the air should be completely free of dust. If the ambient temperature is lower than 20°C, the marks and the places on the vehicle body where the marks are to be attached should be heated to 20 - 30°C.

Peel off the protection sheet on the back of the mark to paste it on the installation position.