BULB REPLACEMENT

HALOGEN HEADLAMP BULB (HIGH/LOW-BEAM) REPLACEMENT

1.Disconnect the battery.

2.Disconnect the connector.

3.Twist the socket cover anticlockwise to remove.
4.

caution

Do not touch the bulb surface with bare hands or dirty gloves. If the bulb surface (glass part) gets dirty, immediately clean it with alcohol or thinner. After drying completely, install the bulb.

Twist the bulb anticlockwise to remove.

DISCHARGE HEADLAMP BULB REPLACEMENT

1.Disconnect the battery.

2.Disconnect the connector.

3.Twist the socket cover anticlockwise to remove.
4.Twist the socket anticlockwise to disconnect it from the bulb.
5.

caution

Do not touch the bulb surface with bare hands or dirty gloves. If the bulb surface (glass part) gets dirty, immediately clean it with alcohol or thinner. After drying completely, install the bulb.

Raise the fastener securing the bulb, and then remove the bulb.

POSITION LAMP BULB REPLACEMENT

<Vehicles with halogen headlamp>

1.Pull out the socket.
2.Disconnect the bulb from the socket.

FRONT TURN-SIGNAL LAMP BULB REPLACEMENT

<Vehicles with halogen headlamp>

1.Twist the front turn-signal lamp socket anticlockwise to remove.
2.Disconnect the bulb from the socket.

<Vehicles with discharge headlamp>

1.Twist the front turn-signal lamp socket anticlockwise to remove.
2.Disconnect the bulb from the socket.