REMOVAL AND INSTALLATION

Post-installation operationFront Fog Lamp Aiming (Refer to

). <Vehicles with front fog lamp and daytime running lamp>

			Removal steps
		1.	Front fog lamp bezel
	>>A<<	2.	Front fog lamp assembly
<<A>>		3.	Daytime running lamp bulb
<<A>>		4.	Front fog lamp bulb
		5.	Front fog lamp unit

REMOVAL SERVICE POINT

<<A>> DAYTIME RUNNING LAMP BULB/FRONT FOG LAMP BULB REMOVAL

caution

Do not touch the bulb surface with bare hands or dirty gloves. If the bulb surface (glass part) gets dirty, immediately clean it with alcohol or thinner. After drying completely, install the bulb.

INSTALLATION SERVICE POINT

>>A<< FRONT FOG LAMP ASSEMBLY INSTALLATION

Tighten the mounting screws to the specified torque in the order shown.
Tightening torque: 2.5 ± 0.3 N·m