REMOVAL AND INSTALLATION

Waterproof film removal steps  · Door trim assembly (Refer to GROUP 52A - Door Trim .) >>A<< 1. Waterproof film Door window glass runchannel removal steps · Door trim assembly (Refer to GROUP 52A - Door Trim .) 2. Door window glass runchannel Door beltline weatherstrip inner removal steps · Door trim assembly (Refer to GROUP 52A - Door Trim .) 3. Door beltline weatherstrip inner Door beltline moulding removal steps · Door mirror assembly (Refer to GROUP 51 - Door Mirror .) 4. Door beltline moulding Front lower sash removal steps · Door trim assembly (Refer to GROUP 52A - Door Trim .) >>A<< 1. Waterproof film 5. Front lower sash assembly 6. Front lower sash 7. Door window glass runchannel rear Door opening weatherstrip inner removal steps · Cowl side trim and front scuff plate (Refer to GROUP 52A - Interior Trim .) 8. Door opening weatherstrip inner Door opening weatherstrip outer removal steps 9. Door check connecting bolt <<A>> 10. Door opening weatherstrip outer

Waterproof film removal steps  · Door trim assembly (Refer to GROUP 52A - Door Trim .) 1. Rear door window centre sash >>A<< 2. Waterproof film Rear door window centre sash removal steps · Door trim assembly (Refer to GROUP 52A - Door Trim .) 1. Rear door window centre sash >>A<< 2. Waterproof film Door window glass runchannel removal · Door trim assembly (Refer to GROUP 52A - Door Trim .) 1. Rear door window centre sash >>A<< 2. Waterproof film 3. Door window glass runchannel Door beltline weatherstrip inner removal steps · Door trim assembly (Refer to GROUP 52A - Door Trim .) 4. Door beltline weatherstrip inner Door beltline moulding removal 5. Door beltline moulding Door opening weatherstrip inner removal 6. Door opening weatherstrip inner Door opening weatherstrip outer removal steps 7. Door check connecting bolt <<A>> 8. Door opening weatherstrip outer

Make the tool as shown in the figure, and remove the weatherstrip from the door panel.

caution When a waterproof film is applied, guide the butyl rubber tape under the inner panel drain hole. Apply the specified adhesive to the water-proof film as shown in the figure and stick the film. Specified sealant: 3M ATD Part No. 8625 or equivalent