INSPECTION PROCEDURE P-15: The tailgate key switch signal is not detected.


caution Whenever the ECU is replaced, ensure that the input signal circuit is normal.


COMMENTS ON TROUBLE SYMPTOM
Input signal from the tailgate key switch is used to operate the central door locking function. If the signal is abnormal, the central door locking function will not work normally.

POSSIBLE CAUSES

  • Malfunction of the tailgate key switch
  • Malfunction of the ETACS-ECU
  • Damaged harness wires and connectors

DIAGNOSIS PROCEDURE

Step 1. Connector check: G-16 tailgate key switch connector

Q. Is the check result normal?

Go to Step 2.

Repair the defective connector.

Step 2. Check the tailgate key switch.
Refer to GROUP 42 - Door .

Q. Is the check result normal?
Go to Step 3.
Replace the tailgate lock key switch.

Step 3. Resistance measurement at the G-16 tailgate key switch connector.

(1)Disconnect the connector, and measure at the wiring harness side.

(2)Resistance between G-16 tailgate key switch connector terminal No.2 and body earth
OK: 2 Ω or less

Q. Is the check result normal?

Go to Step 5.

Go to Step 4.

Step 4. Check the wiring harness between G-16 tailgate key switch connector terminal No.2 and body earth.


note Prior to the wiring harness inspection, check intermediate connector G-14, and repair if necessary.

  • Check the earth wires for open circuit.

Q. Is the check result normal?

The trouble can be an intermittent malfunction (Refer to GROUP 00 - How to Cope with Intermittent Malfunction ).

Repair the wiring harness.

Step 5. Connector check: C-220 ETACS-ECU connector


Q. Is the check result normal?

Go to Step 6.

Repair the defective connector.

Step 6. Check the wiring harness from G-16 tailgate key switch connector terminal Nos. 1 and 3 to C-220 ETACS-ECU connector terminal Nos. 33 and 34.






note Prior to the wiring harness inspection, check intermediate connector C-15 and G-14, and repair if necessary.

  • Check the input line for open circuit.

Q. Is the check result normal?

Go to Step 7.

Repair the wiring harness.

Step 7. ETACS switch data by using the SWS monitor
Check the input signal from the tailgate key switch.

  • Tailgate key switch: Neutral to lock
Item No.
 Item name
 Normal condition
Item 18
 TRK UNLOCK SW
 OFF
Item 19
 GATE LOCK SW
 ON (only when operated to lock)

  • Tailgate key switch: Neutral to unlock
Item No.
 Item name
 Normal condition
Item 18
 TRK UNLOCK SW
 ON (only when operated to unlock)
Item 19
 GATE LOCK SW
 OFF
OK: Normal conditions are displayed for all the items.

Q. Is the check result normal?
The trouble can be an intermittent malfunction (Refer to GROUP 00 - How to Cope with Intermittent Malfunction ).
Replace the ETACS-ECU.