|
Q.
Is the check result normal?
|
|
Repair
or replace the connector.
|
|
|
|
- Disconnect connector, and measure at electronic-controlled throttle
valve side.
- Resistance between terminal No. 5 and No. 6.
|
|
OK: 0.3 - 100 kΩ (at 20
°C)
|
|
Q.
Is the check result normal?
|
|
Replace the throttle body
assembly.
|
|
|
|
Q.
Is the check result normal?
|
|
Repair
or replace the connector.
|
|
|
|
- Disconnect connector and measure at harness side.
- Resistance between terminal No. 144, No. 145 and earth.
|
|
OK: Continuity (2 Ω or
less)
|
|
Q.
Is the check result normal?
|
|
Q.
Is the check result normal?
|
|
Repair
or replace the connector.
|
|
|
|
- Check harness between D-247 (terminal No. 144) engine-ECU
<M/T>
connector or D-218 (terminal No. 144) engine-A/T-ECU <A/T>
connector and D-14 (terminal
No. 6) earth connector.
- Check harness between D-247 (terminal No. 145) engine-ECU
<M/T> connector or
D-218 (terminal No. 145) engine-A/T-ECU <A/T> connector and D-14
(terminal No. 6) earth connector.
|
|
Q.
Are the check results normal?
|
|
- Check output line for short circuit and damage.
|
|
Q.
Is the check result normal?
|
|
Repair
the damaged harness wire.
|
|
|
|
- Check output line for short circuit and damage.
|
|
Q.
Is the check result normal?
|
|
Repair
the damaged harness wire.
|
|
|
|
Q.
Is the check result normal?
|
|
Replace the engine-ECU <M/T>
or engine-A/T-ECU <A/T>.
|
|
|
|
Intermittent malfunction (Refer to
GROUP 00 - How to Use Troubleshooting/Inspection
Service Points - How to Cope with Intermittent Malfunctions ).
|
|
|