INSPECTION


DOOR MIRROR ASSEMBLY OPERATION CHECK
Remove the door trim, and then connect the battery to the door mirror assembly connector to check that the door mirror operates.

Battery connection
 Direction operation

  • Connect terminal 8 to the negative battery terminal.
  • Connect terminal 10 to the positive battery terminal.

 Up

  • Connect terminal 8 to the positive battery terminal.
  • Connect terminal 10 to the negative battery terminal.

 Down

  • Connect terminal 8 to the negative battery terminal.
  • Connect terminal 9 to the positive battery terminal.

 Right

  • Connect terminal 8 to the positive battery terminal.
  • Connect terminal 9 to the negative battery terminal.

 Left

  • Connect terminal 6 to the positive battery terminal.
  • Connect terminal 7 to the negative battery terminal.

 Retract

  • Connect terminal 6 to the negative battery terminal.
  • Connect terminal 7 to the positive battery terminal.

 Return

ACTUATOR OPERATION CHECK

Battery connection
 Pivot plate operation

  • Connect terminal 3 to the negative battery terminal.
  • Connect terminal 4 to the positive battery terminal.

 Up

  • Connect terminal 3 to the positive battery terminal.
  • Connect terminal 4 to the negative battery terminal.

 Down

  • Connect terminal 1 to the positive battery terminal.
  • Connect terminal 2 to the negative battery terminal.

 Right

  • Connect terminal 1 to the negative battery terminal.
  • Connect terminal 2 to the positive battery terminal.

 Left


RETRACTOR MOTOR OPERATION CHECK
Remove the door mirror outer cover. Connect the battery to the connector shown to check that the mirror can be folded and unfolded correctly.

Battery connection
 Pivot plate operation

  • Connect terminal 1 to the negative battery terminal.
  • Connect terminal 2 to the positive battery terminal.

 Retract

  • Connect terminal 1 to the positive battery terminal.
  • Connect terminal 2 to the negative battery terminal.

 Return

HEATED DOOR MIRROR CHECK
caution When relocating the car between locations with extremely different temperatures (warm and cold), leave the car in the location for a while to adapt to the temperature prior to checking it.

Remove the mirror. Check that the resistance value between the connector terminals (at the back of the mirror) is at the standard value.
Standard value: 7.5 ± 1.1 Ω at 25°C

DOOR MIRROR CONTROL SWITCH CONTINUITY CHECK

Switch position
 Tester connection
 Specified condition
OFF
 1 - 2, 1 - 3, 1 - 4, 1 - 6, 1 - 10, 1 - 11, 2 - 9, 3 - 9, 6 - 9, 9 - 10, 9 - 11
 Open circuit
Left side
 OFF
 1 - 6, 1 - 10, 1 - 11, 6 - 9, 9 - 10, 9 - 11
 Open circuit
Up
 1 - 6, 9 - 11
 Less than 2 ohms
Down
 1 - 11, 6 - 9
Right
 1 - 6, 9 - 10
Left
 1 - 10, 6 - 9
Right side
 OFF
 1 - 2, 1 - 3, 1 - 6, 2 - 9, 3 - 9, 6 - 9
 Open circuit
Up
 1 - 6, 3 - 9
 Less than 2 ohms
Down
 1 - 3, 6 - 9
Right
 1 - 6, 2 - 9
Left
 1 - 2, 6 - 9
Retract and return
 1 - 4
 Less than 2 ohms